• Hey Guest. Check out your NeoGAF Wrapped 2025 results here!

AMAZON US Switch up

Status
Not open for further replies.
Any news about preordering the Switch in Mexico?? Preferably on Amazon MX :( ??? I don't trust Gameplanet or Gamers anymore :'(

Besides them I haven't seen anything elsewhere. The Amazon MX Switch page is up, but it hasn't been made available for purchase yet.

I preordered on Gameplanet and Gamers, but if it comes up in Amazon I'll cancel my preorders. I just want a way to have it guaranteed on release day.
 
They are available on Amazon but I'm not sure if it is sold out by now. Keep in mind that the neon joy cons are in reverse color from the SKU version. So joy con R is blue and joy con L is red.

On one hand, I prefer it this way. On the other, it's really annoying.

Dangit, out of stock on Amazon US.

Kind of a bummer but hopefully I can snag some. I like the colors of both of them, but if I can't pick them up I'll get neon blue for both.
 
I signed up for notifications for when they (hopefully) get more in.

Question: Do you have to drop the full $300 to pre-order through Amazon or is it a certain amount? Never pre-ordered something on Amazon before.
Amazon will not notify you by email unless they decide to release it at a specific time at a later date and notify people ahead of time so there can be a virtual bloodbath.

They will charge you the full amount, but not until it's about to ship. There's no preorder charge hold.

I don't like that they have colored straps to match the colored Joycons but they don't include with the Joycons, they include gray ones regardless of color so you have to buy them separately. :(

I actually like the black straps and feel like they add some contrast to the JoyCons. With matching straps I feel like they'd look more toy-like.

It is odd that the console SKUs are merged on one page, when it wasn't like that Thursday night/Friday morning. I'm starting to think they're only getting the grey ones.

They're still separate.

Grey: https://www.amazon.com/dp/B01LTHP2ZK/?tag=neogaf0e-20

Neon: https://www.amazon.com/dp/B01MUAGZ49/?tag=neogaf0e-20
 
Besides them I haven't seen anything elsewhere. The Amazon MX Switch page is up, but it hasn't been made available for purchase yet.

I preordered on Gameplanet and Gamers, but if it comes up in Amazon I'll cancel my preorders. I just want a way to have it guaranteed on release day.

Thanks, compadre! :D Well I guess I will have to do the same and preorder with them just to have them as last resource if it becomes impossible to preorder from Amazon later on. I just hope they don't go nuts with the pricing just like they did with the NES Classic :(
 
There's no way to find out if Amazon will even be having pre-orders for the Neon SKU at all, is there.
Urgh. I have no way of pre-ordering from anywhere but Amazon, too. This is so frustrating.
 
Notifications from Amazon dont work, use a online program that detects changes in the html of the page. Focus on a div container like currently unavailable that will change when the page updates, that triggers an email immediately.

Cool, what software do you recommend? Or are you not allowed to mention here
 
The case included with the Zelda SE is so gaudy. :lol

I'm tempted to order the regular grey one.
Lol, I just preordered one of these.

It's ugly as hell, but it reminds me of a zelda WiiMote condom that I got prelaunch for the Wii that was stolen and I could never find for sale again (it was just a green thin protector with a triforce symbol on it). I loved that thing.
Also, I'm intrigued by those joycon protectors too.

5jkzik4.jpg

7CoXyAS.jpg

IpC5Jyx.jpg


I'm rapidly moving from "I'll get a switch later on in the year, to "I'll get one if I can get one at launch, to "I've been refreshing Amazon all day, but I haven't been able to get one"

I preordered one of these too,
I think it looks better.
FaxDIHY.jpg
 
5jkzik4.jpg

7CoXyAS.jpg

IpC5Jyx.jpg


I preordered one of these too,
I think it looks better.
FaxDIHY.jpg

I've been trying to find a case that fits the switch unit without the joy-cons attached. That way the case isn't too long. My wifes backpack isn't big enough for the full length Switch with controllers. Hopefully a decent one comes around because i've only found a horrible plastic one so far.
 
Woohoo! Just applied one of my gift cards, I now owe $125 for my Switch, with another $100 in gift cards on their way.

I have not been this excited for a Nintendo console since the N64.
 
I've been trying to find a case that fits the switch unit without the joy-cons attached. That way the case isn't too long. My wifes backpack isn't big enough for the full length Switch with controllers. Hopefully a decent one comes around because i've only found a horrible plastic one so far.

My 3DS case was made by Waterfield Designs, who makes the highest quality cases you can find by a huge margin.
3dsxl-lifestyle_grande.jpg

They are still figuring out what they are going to do for Switch carrying cases, but they have a survey on their site where you can tell them what you'd want to see.

https://www.sfbags.com/pages/waterfield-nintendo-switch-case

Let them know that you want to see a form factor that fits the Switch without the Joy Cons and maybe you'll end up seeing that materialize by the time the console launches. Seriously, these guys make the best cases out there.
 
I'm rapidly moving from "I'll get a switch later on in the year, to "I'll get one if I can get one at launch, to "I've been refreshing Amazon all day, but I haven't been able to get one"

I preordered one of these too,
I think it looks better.
FaxDIHY.jpg

I got the Zelda SE preordered too but I'm liking the look of this case you posted.
 
Amazon is such a mess. How long does it take them to make a seperate category for Nintendo Switch?

Still can't preorder the official accessories in Amazon/Best Buy.
 
Distill, I didn't mention it because at the time I couldn't recall it.

Cool, thanks. I also have Visualping set up. What interval would you suggest? I have 5 minutes set for VP (which is the lowest), but for Distill I can set up anything. Should I do 15 (or 30) seconds, or is that overkill?
 
My 3DS case was made by Waterfield Designs, who makes the highest quality cases you can find by a huge margin.
3dsxl-lifestyle_grande.jpg

They are still figuring out what they are going to do for Switch carrying cases, but they have a survey on their site where you can tell them what you'd want to see.

https://www.sfbags.com/pages/waterfield-nintendo-switch-case

Let them know that you want to see a form factor that fits the Switch without the Joy Cons and maybe you'll end up seeing that materialize by the time the console launches. Seriously, these guys make the best cases out there.

I had one of these for my Vita. Pretty expensive but no doubt the best case I've ever owned.
 
Sorry if this in the wrong thread, but is there any way for me to pre-order a Switch pre-launch at this point?

Is it expected that there won't be any more allocated in the US before launch?
 
I had one of these for my Vita. Pretty expensive but no doubt the best case I've ever owned.

Yeah, my gf gave me mine as a bday gift, but I would have easily shelled out the dough for it after seeing the quality. I am eagerly awaiting what they do for the Switch. There's a 0% chance that I will buy a case not made by them this gen.
 
I don't like that they have colored straps to match the colored Joycons but they don't include with the Joycons, they include gray ones regardless of color so you have to buy them separately. :(

I kinda like the black straps with the neon, though :p

So if you buy the two piece neon Joy-Con set, that comes with the black straps or does it not come with them at all? We know we get two with the system, right?
 
My 3DS case was made by Waterfield Designs, who makes the highest quality cases you can find by a huge margin.
3dsxl-lifestyle_grande.jpg

They are still figuring out what they are going to do for Switch carrying cases, but they have a survey on their site where you can tell them what you'd want to see.

https://www.sfbags.com/pages/waterfield-nintendo-switch-case

Let them know that you want to see a form factor that fits the Switch without the Joy Cons and maybe you'll end up seeing that materialize by the time the console launches. Seriously, these guys make the best cases out there.

I bought one of these a few years ago from a GAF recommendation, still use it to this day. High quality and fits perfectly.
 
My 3DS case was made by Waterfield Designs, who makes the highest quality cases you can find by a huge margin.
3dsxl-lifestyle_grande.jpg

They are still figuring out what they are going to do for Switch carrying cases, but they have a survey on their site where you can tell them what you'd want to see.

https://www.sfbags.com/pages/waterfield-nintendo-switch-case

Let them know that you want to see a form factor that fits the Switch without the Joy Cons and maybe you'll end up seeing that materialize by the time the console launches. Seriously, these guys make the best cases out there.

That's pretty awesome, thank a lot for letting me know.
 
My 3DS case was made by Waterfield Designs, who makes the highest quality cases you can find by a huge margin.
3dsxl-lifestyle_grande.jpg

They are still figuring out what they are going to do for Switch carrying cases, but they have a survey on their site where you can tell them what you'd want to see.

https://www.sfbags.com/pages/waterfield-nintendo-switch-case

Let them know that you want to see a form factor that fits the Switch without the Joy Cons and maybe you'll end up seeing that materialize by the time the console launches. Seriously, these guys make the best cases out there.

Waterfield is awesome. Picked up cases for my 3DS and Vita at their SF craft room/warehouse a while back (pretty close to my work) and have just been insanely happy with the quality. Anyone wanting the absolute best quality case you can get in terms of fit, finish, looks, and materials, regardless of price, should consider Waterfield and Waterfield alone.
 
I preordered one of these too,
I think it looks better.
FaxDIHY.jpg

I want to get the version of this that has the screen protector etc. included. When I tried measuring the case from the Amazon dimensions, it seems... small. I don't think the Joycons are attached when you put it in a case. If so, where do they go? On top of the tablet part, inside the meshing?
 
I want to get the version of this that has the screen protector etc. included. When I tried measuring the case from the Amazon dimensions, it seems... small. I don't think the Joycons are attached when you put it in a case. If so, where do they go? On top of the tablet part, inside the meshing?
What?
 
When you put the tablet portion into the carrying case, I wanted to find out if you detach the Joycons, first. Measuring the size of the case doesn't seem big enough, and if the Joycons can even fit in the case.

Make sense?

No why would they release an official case that the joycons don't fit in.
 
Cool, thanks. I also have Visualping set up. What interval would you suggest? I have 5 minutes set for VP (which is the lowest), but for Distill I can set up anything. Should I do 15 (or 30) seconds, or is that overkill?

30 secs is fine, it doesn't matter really you never get a email unless there is a change.
 
Status
Not open for further replies.
Top Bottom