• Hey, guest user. Hope you're enjoying NeoGAF! Have you considered registering for an account? Come join us and add your take to the daily discourse.

The Elder Scrolls V: Skyrim Special Edition PC performance thread

J_Viper

Member
Thanks for the help guys, the V-Sync fix seemed to work, my FPS has certainly increased.

Are there any game breaking bugs that can arise from not locking to 60? It just looks so damn smooth at 100+
 
Thanks for the help guys, the V-Sync fix seemed to work, my FPS has certainly increased.

Are there any game breaking bugs that can arise from not locking to 60? It just looks so damn smooth at 100+

It's generally not worth it because the physics in bethesda titles are locked to the framerate and exceeding 60 generally causes them to speed up to differing degrees depending on framerate. I don't know if there'll be game breaking bugs though.
 

jorimt

Member
Seeing as fallout 4 got it in a later update, maybe the se will as well. I hope anyways.

Yeah, but the PC version of Fallout 4 was backed by Nvidia GameWorks from the beginning, so I doubt they will bother in this case. But I wouldn't mind being wrong, it would be nice to have.

Also, I just tested the existing HBAO+ flag for the original game on this version; it didn't work.
 
Dropping godrays and shadows to medium really gave it a nice boost on my Nvidia 960. Opening scene was hovering around 50fps or more instead of the 40-45, and once in the village, it was mostly 60fps. Once out into Skyrim, except for a little bit in the beginning outside the cave when I started walking towards the trail towards Riverwood, it was a pretty stable 60fps. Not bad at all.
 

JaseC

gave away the keys to the kingdom.
What should I be using - fullscreen or borderless window?

Borderless window is the easy route to triple buffering, but as the game's physics engine doesn't properly support framerates above 60fps, it's not much of an advantage in this case unless you're jumping between 30fps and 60fps as a result of double-buffer vsync, which is enabled by default.
 

leng jai

Member
Locked 60fps at 1440p Ultra on my 6600K/1070. Seems like there might be a bug with the conflicting performance reported in this thread.
 

Vitacat

Member
Locked 60fps at 1440p Ultra on my 6600K/1070. Seems like there might be a bug with the conflicting performance reported in this thread.

I had to OC my i6700k to 4.4Ghz to get constant 60.

6700k, n1080, 16gb, game installed on SSD. All settings maxed.

You're definitely getting better performance than most here. What is different I wonder?

NOTE: game is running off a secondary SSD, my D drive. I've read about odd bugs sometimes with Skyrim being installed to anything other than the C drive. Makes no sense, but this is Bethesda. So I wonder, would moving the game to my C drive matter?
 
I'm running the game on a 1070 and 6700k with g-sync enabled and get drops and fluctuations from 110 fps to like 9 fps constantly. Will try turning gsync off and turning my monitor refresh rate down to 60 fps, but I hope this issue gets patched.

edit: turning gsync off and setting refresh rate of my monitor to 60 fps gives smooth performance. After playing for like 20 minutes I remember again how boring this game is lol.
 
FX6300 (5GHz OC, Hyper 212 Evo cooler)
GTX970 (Stock settings, except fan curves adjusted to compensate for recent drivers crippling default curves)
8GB RAM (Forgot the speed *shrug*)

Ultra settings, except for God Rays and Shadow Distance turned down. Several mods installed, such as Open Cities.

Perfect 72FPS without issues no matter what was going on as far as my benchmarking has reached. I don't know what's going on with other people.

That said, I'm going back to 'NillaRim. All my favorite mods like Requiem require SKSE, and can't be configured without SkyUI. Someone call me back when all the overhauls that matter get ported, in addition to SKSE and SkyUI or a viable alternative that swoops in to take its place since the SkyUI team decided to abandon ship because we said "No." to Paid Mods.
 

Abhor

Member
FX 8350 4.4
RX 480
16GB RAM

Played all the way until Riverwood. No crashes, buttery smooth FPS. Load times with SSE installed on my Crucial MX300 are stupidly fast. Already have a number of mods installed too.
 

ss_lemonade

Member
Yeah please let me know, thanks.

Off to a great start, the launcher and game itself ran off of the intel igpu, resulting in 8fps on ultra lol. You need to force the 970m to run here. Anyway, from my 5 minutes worth of testing, the initial caravan scene hovers between 40-50fps on ultra at 1080p, then improving a bit once you reach the village. Seems to be pretty good for the 970 and it looks like a good 60fps is doable with a few adjustments.
 
4790k & 980ti, no overclock
16gb ram
ssd

I'm getting juddering and fps dips down in to the territory of 40 about 5-10 times a minute when playing on Ultra preset @ 1440p. It's frankly just not very playable for me right now.

And the lipsync is seemingly worse than the original, like it's locked to 30.



Am I doing something wrong?
 
I'm on a GTX 770, which IS obviously an aging card, but I actually had somewhat decent performance (close to 60 fps)

That is, until I went into a mine that had an indoor lake and waterfall, where looking at the waterfall tanked the framerate to an unplayable 15fps.

Bethesda really pulled some shit. Not that I expect my 770 to be flawless, but there's definitely something going on when a game that hovers in 50-60 tanks to 15 when looking at a waterfall.
 

timewyrm

Member
Off to a great start, the launcher and game itself ran off of the intel igpu, resulting in 8fps on ultra lol. You need to force the 970m to run here. Anyway, from my 5 minutes worth of testing, the initial caravan scene hovers between 40-50fps on ultra at 1080p, then improving a bit once you reach the village. Seems to be pretty good for the 970 and it looks like a good 60fps is doable with a few adjustments.

Lol, thanks for the heads up. You got a i7 4720hq in your lap ?

I gotta try Skyrim 8fps version :)
 

Dsyndrome

Member
Tried max settings (recommended) at 1440P and 1080P on my i7-6820HK and GTX 1080, former ran 47-50FPS, latter was 50-53FPS. What gives?

Edit: Issue was GSYNC.
 

Erekiddo

Member
I did the G-Sync fix mentioned above and changed my options to window + borderless. No issues since.

I was getting a glitch effect during the Bethesda logo at the opening and thought it was intentional. It totally wasn't intentional.

Currently running: i7-4790k, EVGA 1080FTW, 32GB RAM, 165Hz, GSync monitor @ 2560 x 1440. Ultra settings.
 
i5-4690k, RX 480, 16 GB DDR3

Going from the start to Whiterun, it seems to be stable around ~58 fps with the occasional dip into ~45 range with the game fully maxed at 1080p.
 

JaseC

gave away the keys to the kingdom.
Can I change the FOV in some setting?

Assuming nothing has changed:

- Open Documents\My Games\Skyrim Special Edition\Skyrim.ini and add bAllowConsole=1 to the General section
- In the same file, add the following to the Display section:

fDefaultWorldFOV=XX
fDefault1stPersonFOV=XX

...and do the same with SkyrimPrefs.ini
- Run the game, open the console (~ or your regional equivalent) and enter fov XX followed by refreshini
 

cube001

Member
I made my own profile and copied some of the settings from the Fallout 4 one. Are you using borderless windowed mode? That caused massive stutter for me and a much lower framerate. Switching to fullscreen fixed it.

Would you please upload your profile?
 

Agent_4Seven

Tears of Nintendo
Well, I think I'm okay with original version + ENB + 10 or so mods that I use.

To get this "Special Edition" I need like one DLC I still haven't bought (useless Hearthfire) and even though it costs me like 80 RUB or something, fuck it, it's not worth it.
 

Branson

Member
Ran locked 60 at 1080p with a 2500k @4.5 and a 980. 8gb of ram. Ultra Settings. Only tested opening to Whiterun area.
 

ISee

Member
Well, I think I'm okay with original version + ENB + 10 or so mods that I use.

To get this "Special Edition" I need like one DLC I still haven't bought (useless Hearthfire) and even though it costs me like 80 RUB or something, fuck it, it's not worth it.

Could be worth it in the future because of native 64 bit (4+gb ram) and dx11 support. That is if you plan to replay the game of course.
 

BizzyBum

Member
i7 6800K @ 3.8 GHz
GTX 1080 (slight OC) w/ latest drivers
16GB RAM
Win 10 64-bit

Running it completely maxed out at 4K.

Outdoors varies but usually around 50-60fps, indoors is a solid 60fps.

The iVsyncpresentinterval to 0 was a lifesaver, anyone with a gsync monitor needs to change that in the ini file. Even though the game runs at 60fps it sometimes is not a smooth fps, seems a bit janky at times.
 

Agent_4Seven

Tears of Nintendo
Could be worth it in the future because of native 64 bit (4+gb ram) and dx11 support. That is if you plan to replay the game of course.
Nope, I've no desire to play this game again after I finish my first playthrough cuz it's not Morrowind and Morrowind is a much better TES game and will always be my favorite. I've played this game for years after it came out and I couldn't even finish Slyrim with all of it's story DLCs at least onces after 5 years since launch. That should tell you something. It's better that Oblivion, but nothing more, unfortunately.
 

c0Zm1c

Member
Yep, started with fullscreen. I changing dx1x to killing floor bits, then changed dx10 # of gpus to 4 and predefined sli mode to AFR.

Perhaps it's something Vsync related? What happens when you turn that off?

Would you please upload your profile?

It would be quicker and simpler to make your own, surely?

there's no way to play this in 3440x1440 resolution yet, is there?
The same method as for ultra-wide in the OP should work.

edit: oh wait, that is ultra-wide, so yeah that will work.
duh!
 

c0Zm1c

Member
I did and it performed worse than a single GPU, hence, I asked for yours to eliminate errors.

Which SLI bits did you use? I just copied the one from Fallout 4 (0x080000F5), and the two options from the SLI section (though I don't think they are needed if the compatibility bits are used). That's literally all my custom profile is.

If it still performs poorly with that then the problem must something else unrelated to the profile. I needed to switch from borderless windowed to fullscreen to get it running smoothly, could it be that?
 

RE4PRR

Member
Which SLI bits did you use? I just copied the one from Fallout 4 (0x080000F5), and the two options from the SLI section (though I don't think they are needed if the compatibility bits are used). That's literally all my custom profile is.

If it still performs poorly with that then the problem must something else unrelated to the profile. I needed to switch from borderless windowed to fullscreen to get it running smoothly, could it be that?

The only thing I have on is G-Sync but using the FO4 sli profile both cards put me down horrendously.
 

ISee

Member
6700k
GTX 1070
16gb ram
ssd

Seems to be able to run at 2880x1620/60 (-->1080p) so far. Most of the time the GPU isn't even hitting its max. stable boost clock (2050mhz). At least when not recording.
Loading times seem to be faster... or I'm just imagine things

max settings said:
2880x1620pfjb6.png

edit: To be honest. The slight TAA blurriness is actually good here. I'll keep it on.

I also did a short performance vanilla vs remaster comparison video on my 1070 @ 1080p (GPU load, fps is capped). The remaster is definitely more demanding, but it's nothing drastic (imo). Did my best to sync stuff up...

https://www.youtube.com/watch?v=MpNwV9wYcIM
 

cube001

Member
Which SLI bits did you use? I just copied the one from Fallout 4 (0x080000F5), and the two options from the SLI section (though I don't think they are needed if the compatibility bits are used). That's literally all my custom profile is.

If it still performs poorly with that then the problem must something else unrelated to the profile. I needed to switch from borderless windowed to fullscreen to get it running smoothly, could it be that?

I've done exactly that with no luck, man I was really excited to return to skyrim in 4k... guess i'm replacing my 980 tis with a single 1080ti whenever they release it.
 

JaseC

gave away the keys to the kingdom.
i7 2600
16GB
960 4GB
Windows 10


I've verified the files but I still can't access the launcher via Steam. My PC is working perfectly.

If you pre-loaded, try reinstalling. The game was insta-crashing on me until I reinstalled.
 

SnowTeeth

Banned
If you pre-loaded, try reinstalling. The game was insta-crashing on me until I reinstalled.

Try reinstalling.
I remember reading about some people having the same issue with vanilla and win10. Apparently something can go missing.

Well god damn. Standard Australian internet means I will not be playing this tonight. *shakes fist at all that are responsible*

Cheers for the advice guys.
 
Top Bottom