How? Console command?
-
Hey, guest user. Hope you're enjoying NeoGAF! Have you considered registering for an account? Come join us and add your take to the daily discourse.
Battlefield 1 PC Performance Thread
- Thread starter iRAWRasaurus
- Start date
How? Console command?
Did some 200% Resolution Scaling Benchmarks on my GTX 1080
Video: https://youtu.be/Ng_osl2zfC8
PC Specs:
Fractal Design Node 804
COOLER MASTER Silent Pro Gold Series RS800-80GAD3-US 800W
Corsair h80i v2 Liquid Cooler
Intel Core i7-6700k 4GHz (Overclocked to 4.5GHz)
ASUS STRIX GeForce GTX 1080 8GB (Overclocked to 2.1GHz)
GIGABYTE G1 Gaming GA-Z170MX-Gaming 5 Z170
CORSAIR Vengeance LPX 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3000 (PC4 24000)
Western Digital WD Black WD1002FAEX 1TB 7200 RPM SATA 6.0Gb/s 3.5"
SAMSUNG 840 EVO MZ-7TE120BW 2.5" 120GB SATA III TLC Internal Solid State Drive (SSD)
SAMSUNG 850 Pro Series MZ-7KE512BW 2.5" 512GB SATA III 3-D Vertical Internal Solid State Drive (SSD)
Video: https://youtu.be/Ng_osl2zfC8
PC Specs:
Fractal Design Node 804
COOLER MASTER Silent Pro Gold Series RS800-80GAD3-US 800W
Corsair h80i v2 Liquid Cooler
Intel Core i7-6700k 4GHz (Overclocked to 4.5GHz)
ASUS STRIX GeForce GTX 1080 8GB (Overclocked to 2.1GHz)
GIGABYTE G1 Gaming GA-Z170MX-Gaming 5 Z170
CORSAIR Vengeance LPX 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3000 (PC4 24000)
Western Digital WD Black WD1002FAEX 1TB 7200 RPM SATA 6.0Gb/s 3.5"
SAMSUNG 840 EVO MZ-7TE120BW 2.5" 120GB SATA III TLC Internal Solid State Drive (SSD)
SAMSUNG 850 Pro Series MZ-7KE512BW 2.5" 512GB SATA III 3-D Vertical Internal Solid State Drive (SSD)
EatChildren
Currently polling second in Australia's federal election (first in the Gold Coast), this feral may one day be your Bogan King.
Nvidia Inspector. Using the Battlefield 1 profile (or any game for that matter), I set Transparency Supersampling to AA_MODE_REPLAY_MODE_ALL and that enables brute forced LOD bias to work.
I got the same in an Operations match with an I5 4690k@3.9ghz, 16gb, and a GTX 1080.
I also found out that using a DS4Windows causes the same stuttery low fps performance. But thats not related to the Operations matches.
So its some kind of cpu usage problem?
Felix Lighter
Member
I'll test for negative scaling. Disappointing it isn't better. BF4 was a game that scaled great with SLI.
Felix Lighter
Member
I did a test on a single map quickly but what I'm seeing with SLI on vs off is little to no scaling. SLI appears to have higher max framerates but also lower min framerates, the average is probably pretty much a wash. I think I'll just use a single 980ti for now. I'm not seeing a benefit for SLI at the moment, Definitely a disappointment. This is why I'm going to sell my 980tis and replace it with a single 1080ti when it's released.
What speed of main RAM?
Hello? This is Hailun!
Member
i5 2400
8 gigs RAM
970
Any tips for getting this to run better? Everything is medium, Geforce Experience optimized the game, but I get massive single digit FPS drops whenever anything starts happening.
8 gigs RAM
970
Any tips for getting this to run better? Everything is medium, Geforce Experience optimized the game, but I get massive single digit FPS drops whenever anything starts happening.
I'm having great performance, using a 144hz 1080p monitor with:
gtx 970 SLI
i7 3820 @ 4.5ghz
16gb ddr3 @1800 mhz
Game is above 100fps 90% of the time, see drops between 75-100 sometimes though when playing Conquest. I'm loving it. Glad I didn't sell these two for a 1070 just to have a single card......waiting for next gen to upgrade.
gtx 970 SLI
i7 3820 @ 4.5ghz
16gb ddr3 @1800 mhz
Game is above 100fps 90% of the time, see drops between 75-100 sometimes though when playing Conquest. I'm loving it. Glad I didn't sell these two for a 1070 just to have a single card......waiting for next gen to upgrade.
nuclearaddict
Banned
To everybody having problems with more than capable machines: download CPU-Z and check the memory tab. See what it says for "channel". If you have multiple sticks of RAM and it says "single", turn off your computer and install them as dual channel.
I did that (I know better! Been building PCS for over 10 years) and now it's locked at 60FPS.
I did that (I know better! Been building PCS for over 10 years) and now it's locked at 60FPS.
He needs to have some incredibly ancient DDR3 for it to matter.
Or quad channel if your platform supports it.
CaptainSmirnov
Member
Just realized this game has dolby atmos, my goodness even without overhead speakers it sounds amazing.
Guerrillas in the Mist
Member
Try changing it to DX12, see if that makes a difference.
Why is this option greyed out for me? I can't enable it. I've tried changing the output confirgurations, etc. Nothing works. I'm using stereo headphones.
CaptainSmirnov
Member
You have to have a reciever with atmos support or some headphones I believe
Strange because it worked beautifully in Overwatch with standard headphones. Hope they patch it.
gtx 1080
3770K @ 4.3
16 GB ddr3
SSD
Windows 10
Running at 1440p on a gysync 144hz monitor. Been playing on ultra and framerate seems to be mostly in the 90s with drops as low as high 50s (seldom). It seems to run at high FPS but there is something off about it. i feel for as high as the framerate is it feels kind of stuttery. Anyone else seeing the same behavior? any way to fix it?
3770K @ 4.3
16 GB ddr3
SSD
Windows 10
Running at 1440p on a gysync 144hz monitor. Been playing on ultra and framerate seems to be mostly in the 90s with drops as low as high 50s (seldom). It seems to run at high FPS but there is something off about it. i feel for as high as the framerate is it feels kind of stuttery. Anyone else seeing the same behavior? any way to fix it?
The Janitor
Member
Why use DX12 with that rig? Pretty sure DX11 runs better.
Fast Sync is simply triple buffering for Direct X. It's meant to get you the best control response by letting the game engine run as fast as possible, regardless of your monitor refresh rate. It then discards selected frames to deliver one every 16 ms to your display so it stays in sync.
You don't see the extra frames, but the game is processing more of your control inputs than it would if you didn't use fast sync. It's a bit like the responsiveness of playing with Vsync off but without the screen tearing.
Iorv3th
Member
HWmonitor showed the temp at about 43c. Most times I checked it it was reading about 50% cpu useage as well.
I monitored my GPU and kept the log. You can literally see where it locks up.
GPU Core Clock [MHz] , GPU Memory Clock [MHz] , GPU Temperature [°C] , Fan Speed (%) [%] , Fan Speed (RPM) [RPM] , Memory Used [MB] , GPU Load [%] , Memory Controller Load [%]
I've never had hard freezes like this in other games and I just finished The Witcher 3's expansions on ultra/high.
Look at that log. Your clock is dropping very low and load% is dropping to 0. Your fan is also shutting off at what looks like random times.
Do you have any GPU programs running like MSI Afterburner or anything from the manufacturer?
Is your 980 overclocked? I had a problem where my display driver would crash in rise of the tomb raider on a 970. Wouldn't do it on any other game at the overclock I had but would do it on tomb raider. Turned it down a tad and it stopped happening.
I was reading that the DX12 version with new Nvidia drivers actually has better performance than the DX11 version. Have you seen comparisons showing something different with the latest drivers?
SmartWaffles
Member
The DX12 renderer has some pretty bad frame time spikes, use DX11 is actually smoother.
KINGofCRA5H
Member
Ok I will try this.
I noticed I had the GPU Memory restriction setting to on, and VRAM was hoving around 3.5GB. I turned it off since I have a 4GB card, hopefully that will help.
The problem is that the crash doesn't happen until after about an hour or so of game play. So the only way I can know if it's working is if I am able to play for longer than an hour without a crash.
Yeah, it is, it's the FTW edition.
Using MSI Afterburner I noticed the temp limit was set to 80C. There were times that it would hit 79-80C, does that mean the GPU was shutting itself off? I set it to 85. I'll try this and scaling back the clock speeds too. Will do more testing tonight when I get off work.
Good performance on my end:
e5-1650 v2
8g DDR3 1666 mhz EEC RAM
GTX 1060
Samsung 850 SSD
Just slapped it up to High and get between 110 and 120 fps. I imagine I can probably tweak the settings more carefully later to try and get some stuff higher without compromising FPS.
Also, need to mess with my 1060 overclock as well, might be able to squeeze a few more FPS out of it that way.
e5-1650 v2
8g DDR3 1666 mhz EEC RAM
GTX 1060
Samsung 850 SSD
Just slapped it up to High and get between 110 and 120 fps. I imagine I can probably tweak the settings more carefully later to try and get some stuff higher without compromising FPS.
Also, need to mess with my 1060 overclock as well, might be able to squeeze a few more FPS out of it that way.
Hello? This is Hailun!
Member
I also unlocked a gun in the battle pack, added to inventory, but can not find it under any class.
I also unlocked a gun in the battle pack, added to inventory, but can not find it under any class.
It's skin for said weapon, not weapon itself.
Don't think it's a good idea for Fast Sync in this game, you need to be getting around 180FPS for that to not cause issues with a 60hz screen.
Struggling to get 60fps with everything on LOW on my brother's PC.
1920x1080
i5 4670@3,4Ghz
GTX 970
16GB
Game is installed on a standard hard drive
With the optimal GeForce Experience or the "Auto" in the game's options (mix of ultra and high) I get around 35fps. V-sync is on, FOV on max.
Is this normal ? (His PC might a mess)
1920x1080
i5 4670@3,4Ghz
GTX 970
16GB
Game is installed on a standard hard drive
With the optimal GeForce Experience or the "Auto" in the game's options (mix of ultra and high) I get around 35fps. V-sync is on, FOV on max.
Is this normal ? (His PC might a mess)
I get pretty high temperatures as well, around 76c on a 6700k @ 4.5ghz. That';s with an HI100 v2 cooling it too.
XANDER CAGE
Member
Curious, should I be using DX11 or DX12 with an i7-3770? It's getting a bit long in the tooth I think, got it at the very beginning of 2013.
ItsTheNew
I believe any game made before 1997 is "essentially cave man art."
Tried both, using the eye test I'd say dx11 if paired with Nvidia.
XANDER CAGE
Member
Oh I should've said - AMD RX470.
2133mhz in dual channel mode.
petethepanda
Member
Am I blind or is there no option for toggle zoom?
KINGofCRA5H
Member
It's there for sure, under gameplay I think
Should be there under gameplay options I believe.
Iorv3th
Member
Maybe try turning the overclock down slightly or turn up the fan profile and make sure its set to use custom fan profile.
So for some reason the game doesn't utilize full core clock speeds unless it's stressing the system. When I play at 1080p, my core clock speed sits at around 1000 Mhz. When I turn resolution scaling up to 115%, it goes to 1300, and at 125% it goes to my OC speed of 1490 Mhz.
Even then, the speed fluctuates depending on where I stand and look.
970 btw
Even then, the speed fluctuates depending on where I stand and look.
970 btw
What issues should I be aware of? 9 hours so far and havnt noticed anything.
Origin resources usage
- QtWebEngineProcess.exe x3 => ~ 6 to 12% CPU, 124MB RAM
- Origin.exe => ~ 7 to 10% CPU, 54MB RAM
- Steam Client Bootstrapper aka Steam.exe => ~ 0 to 0.5% CPU, 22MB RAM
- Steam Service and Helper processes => ~ 0% CPU, ~ 3MB RAM
I'm running a 970 overclocked slightly and I'm on a mix of Ultra/High - Resolution scale at 115% and I'm in the 80's most of the time on DX11.
Damn, my 970 is not overclocked but it seems like I have LOD issues where if I look over a vast area of land my FPS tanks