That's good to hear. I'm still waiting on my Feb. 19th confirmation. Getting arcade parts has been a somewhat frustrating experience...Tiduz said:my lizardlick order just shipped, ordered 19th feb, so anyone else who ordered around that time should be getting an email soon id imagine.
Bananimus said:That's good to hear. I'm still waiting on my Feb. 19th confirmation. Getting arcade parts has been a somewhat frustrating experience...
Yeah. I already subbed my JLF order with the LS-32-01. I'm just waiting for shipping notification at this point.OniLee said:If you are waiting for a JLF stick, you may be waiting for a while. I just got this email from Lizard Lick:
Your order has not shipped, due to the world-wide shortage of JLF joysticks. What we are offering our customers is to substitute the JLF with a Seimitsu LS-32-01, or we can ship your order without a joystick and refund you back the cost of the JLF. I apologize for the inconvenience, Sanwa has actually run out of JLF's at the source, and we are not expecting to see any more until April. In an attempt to get caught-up on our orders, we will not be holding back orders with JLF's. We can ship the LS-32-01 with Sanwa tops to match your Sanwa buttons, and will also refund you back for any accessories that you ordered for your JLF, if you wish. Please indicate how you would like to proceed with your order by replying to this email directly...
Thanks,
Chad
www.lizardlick.com
I almost spit lemonade all over my computerdonkey show said:While waiting on the wifey to work on my art for my stick, I grabbed a sharpie and took matters into my own hands for a temp.
Baron said:I finished up the rewiring of my first Hori Wii stick. I modded this stick about 2 months ago - it was my first stick mod and I was happy with it at the time, but after doing a second one, my skills had progressed so much that the first looked positively amateurish, so I decided to re-do it. Also, I was bored. It's not completely finished yet, as you can see, I am going to put green Sanwa button plungers in the white button "rims", but all shops have stopped taking orders for now and it has to be put on hold until they accept them again. -_-
I need to place a quartet of rubber feet-stoppers on the bottom plate, the screw heads protrude and will scratch whatever surface it is set upon. Not a big deal, as I use these smaller Hori sticks as lap sticks, but all the same it will be done. I also need to place some plastic washers in between the plate and the screw posts. That will be done this weekend.
I cut and installed a new piece of lami-flex plexiglass to fit on the bottom in place of the original metal plate to both show off the wiring work and also to solve the problem of the PCB shorting out against the plate. This took forever. If you don't have the patience and all you have is a dremel tool like me, don't bother, it literally took 2 hours of sanding to get it where it fit properly.
Mattlikewhoa said:WOOT! My order from akihabarashop has shipped. They are changing the order format for future orders.
donkey show said:While waiting on the wifey to work on my art for my stick, I grabbed a sharpie and took matters into my own hands for a temp.
UC1 said:My TE stick from LizardLick shipped!
Yeah it's a shame.Davidion said:Well, here goes my first broadside. Apparently, my research didn't uncover that LS-32s can't be installed in HRAP3s. *smacks forehead* Off I go to try to swap out the joystick that probably already shipped.
UC1 said:My TE stick from LizardLick shipped!
donkey show said:While waiting on the wifey to work on my art for my stick, I grabbed a sharpie and took matters into my own hands for a temp.
you should just buy real HAPP parts if you like the feel of the X-Arcade. Or did they stop using knockoffs?MobiusPigeon said:i played with an x arcade stick at frys today and holy SHIT i LOVE it. square and octogates suck so bad its not even funny. it uses HEAVY springs (so heavy that the stick literally snaps back into place if you let it go) and full 360 degree motion. after playing with it i soooooooooo wanna just build my own stick. they have parts on the cheap at xgaming.com too. you can get 2 stick modules and a shitload of buttons for like $40. http://www.xgaming.com/arcade_parts.shtml
who would be the comparable american arcade part manufacturer? would it be happ? man going back to control with no restrictive angles was like heaven. too bad the x arcade isnt 360 compatable.
gutter_trash said:ah! a Sakura player
LuCkymoON said:you should just buy real HAPP parts if you like the feel of the X-Arcade. Or did they stop using knockoffs?
Another quick question, do I want the LS-32 or LS-32-01 for the MadCatz SF4 SE Fight stick?Ryder said:QUICK QUESTION:
Seimitsu LS-56-01, ordered from Lizard Lick (i.e. it comes with the VF Mounting Plate): Will this fit in my HRAP3 worry free?
leehom said:Another quick question, do I want the LS-32 or LS-32-01 for the MadCatz SF4 SE Fight stick?
I've asked a few times and haven't received an answer yet ):
eh, I'd stay away from x-arcade. If you like the feel of american parts go for a MAS stick.MobiusPigeon said:i played with an x arcade stick at frys today and holy SHIT i LOVE it. square and octogates suck so bad its not even funny. it uses HEAVY springs (so heavy that the stick literally snaps back into place if you let it go) and full 360 degree motion. after playing with it i soooooooooo wanna just build my own stick. they have parts on the cheap at xgaming.com too. you can get 2 stick modules and a shitload of buttons for like $40. http://www.xgaming.com/arcade_parts.shtml
who would be the comparable american arcade part manufacturer? would it be happ? man going back to control with no restrictive angles was like heaven. too bad the x arcade isnt 360 compatable.
Halvie said:Selling some stuff. Only taking paypal. US buyers only.
A bunch of stick parts:
dark blue mesh top ball
2 x 24mm Sanwa dark blue snap in buttons
1 x GT-Y octo-gate
2 x 30mm button plugs
all these parts for $20 shipped
robot said:Would you consider modding other peoples (mine) wii sticks? I'd like to get some sanwa parts in there but dont have the time/patience for it. But I do have money!
ruh rohjon bones said:FUCKKKKK
2 buttons on my TE went out last night. Hard Kick and KKK (which I never even press).
Debating if I should call them and use the warranty or open it up and try to fix it myself... It's probably just a couple loose QD's.... :/
It's still under warranty. Call customer service. I didn't risk getting adventurous with mine (though the whole PCB crapped out in my situation - lol madcatz).jon bones said:FUCKKKKK
2 buttons on my TE went out last night. Hard Kick and KKK (which I never even press).
Debating if I should call them and use the warranty or open it up and try to fix it myself... It's probably just a couple loose QD's.... :/
jon bones said:FUCKKKKK
2 buttons on my TE went out last night. Hard Kick and KKK (which I never even press).
Debating if I should call them and use the warranty or open it up and try to fix it myself... It's probably just a couple loose QD's.... :/
donkey show said:So... the wifey and I have pushed ourselves further in front of the line to get into hell. What started out as a joke ultimately became the final product.
I present to you the...
I'm going to reprint it again, line it up right this time, and fix that damn triangle button, but man do I love this art we made. The guy @ kinko's started laughing his ass off when he opened up the file before he printed it out.
donkey show said:So... the wifey and I have pushed ourselves further in front of the line to get into hell. What started out as a joke ultimately became the final product.
I present to you the...
http://daviddino.com/pedostickte1.jpg[/IMG
[IMG]http://daviddino.com/pedostickte2.jpg[/IMG
[IMG]http://daviddino.com/pedostickte3.jpg[/IMG
I'm going to reprint it again, line it up right this time, and fix that damn triangle button, but man do I love this art we made. The guy @ kinko's started laughing his ass off when he opened up the file before he printed it out.[/QUOTE]
You sir, are amazing.
I wanted to make GAF proud. :lolAwntawn said:You sir, are amazing.