• Hey, guest user. Hope you're enjoying NeoGAF! Have you considered registering for an account? Come join us and add your take to the daily discourse.

PS3 CFW & Homebrew: Scene Revived! -- morality arguments elsewhere

MMaRsu

Banned
That sucks, sorry to hear that : But instead of buying a new PS3, can't you flash the one you already have? I know that it require hardware flashing, but maybe someone close to you can do it? Maybe some modchip shop/website.

I seem to have located a shop an hour drive away from me that can downgrade ps3's. Because i thought it was irreversable i already formatted it..eh ill still go there and downgrade it. Im still pissed off at myself for forgetting there was a disc in there. So damn stupid.
 

Darknight

Member
Yes, Snes9x and Retroarch for PC can use these shaders. But, it'll depend on your gpu shader power.

Other than that, almost all PC emulators have at least some cpu filters you can use to depixelate your games when running in higher resolutions.

thanx sir. i got i5 2500k so my cpu is a beast just that i can find good filters.
 

test_account

XP-39C²
I seem to have located a shop an hour drive away from me that can downgrade ps3's. Because i thought it was irreversable i already formatted it..eh ill still go there and downgrade it. Im still pissed off at myself for forgetting there was a disc in there. So damn stupid.
Does formating it changes anything?
 

Majmun

Member
Just did the update to cfw 4.21.
Everything went fine.

But the following message keeps popping up:

"the maximum amount of usb power has been reached when attempting to power USB devices, please remove at least one and try again"

NEVER had this issue before. Can I turn this off?

-edit-

It disappeared all of the sudden. That was strange
 

itxaka

Defeatist
Dont update through the recovery menu with a disc in the drive that's my fucking tip.

Im already looking to buy a new 3.55 machine, although mine was a perfect slim 320gb beauty. FML

for 80€ you can get a flasher to downgrade your console. cheaper than buying a new one methinks.
 
Anyone know how to do a full system wipe, like history, accounts, PSN accounts etc?

I want to get the new CFW, and then go online with it. However, for this PS3 I have already gotten an email from Sony saying "you gonna get banned" or something like that. I've got a separate PS3 now for my main PSN account, but i'd happily make a new one for the CFW PS3. Just as long as the main one isn't affected by proxy.
 

JaseC

gave away the keys to the kingdom.
So what's the upgrade process for those on CFW 4.21 who'd want to move to a higher CFW in the future? Also, and most importantly, is it possible to change the region of the BD drive with CFW 4.21?
 

jediyoshi

Member
Got rogero 4.21 1.09 cfw working fine up from 3.55 cfw. In the process of redownloading game updates for clean versions.

Found a few user ported versions of ps3usercheat, none working so far.
 
OMG MMaRsu that fucking sucks. My heart sank when I read that happened to you. Gonna set you back a few bones and cause a big headache but you can thankfully flash it back at least. Tough break.

N.A. said:
- Compatibility problem with some Slim models (CECH-25xx) is now fully fixed.
- XMB Icons problem from in-game PS button is now fixed.
- Loading games from App_home Icon is now fixed.
- Many other fixes from version 1.00 for a better performance and added stability.
- It was tested by hundreds of testers on all PS3 models (FAT & Slim) and no problems were encountered.
- It can run games signed with Keys up to version 4.21 without any Eboot/Sprx patching needed
- Games can be loaded from Disc Icon (with Original game in BD) and from app_home (Disc-less, but not all games).
- Current 3.55 homebrew applications can't be loaded on this CFW, applications must be re-signed properly for FW4.21]

What does that mean exactly? That the games with patched eboots to work on 3.55 (SSX for example) will work on 4.21 without needing to revert back to the original eboot?

Guessing PSN doesn't work completely? (Store/activations and all)

Not sure if I should wait for rebug or get this.

Also, is this really how the boot up screen looks on rogero? With his branding? I really hope that isn't the case. How tacky.

Cucx1.jpg
 

jediyoshi

Member
What does that mean exactly? That the games with patched eboots to work on 3.55 (SSX for example) will work on 4.21 without needing to revert back to the original eboot?

It just means games that require fw up to 4.21 don't need to be patched anymore. Conversely I believe you'll need to revert patched eboots back to their originals.

The boot up PS logo is replaced with rogero's logo.
 
That's the case. I don't think a boot animation needs to look sophisticated. Also 4.21 is safe now for the most part. When rebug comes out we can just upgrade again. It'll be nice to play wwe 13 if rebug isn't out yet on Tuesday ... Thinking of burning up a free redbox rental on dishonored this weekend.
 
It just means games that require fw up to 4.21 don't need to be patched anymore. Conversely I believe you'll need to revert patched eboots back to their originals.

The boot up PS logo is replaced with rogero's logo.
Thank You!
That's the case. I don't think a boot animation needs to look sophisticated. Also 4.21 is safe now for the most part. When rebug comes out we can just upgrade again. It'll be nice to play wwe 13 if rebug isn't out yet on Tuesday ... Thinking of burning up a free redbox rental on dishonored this weekend.
I'll probably give it a go now just because I am bored.
3AQmK.gif


The boot animation thing is not a deal breaker, of course. But it's still tacky. I appreciate the work Rogero does as much as anyone, but I don't need his branding splashed all over my PS3. I know he's the creator of my firmware. Put your name under system settings somewhere, but not on my beautiful boot up! ~_~
 

Surreality

Neo Member
To save people a few headaches once you've updated to RogerO 4.21CFW:
Internal games will run fine from my experience. If you're using an external drive, make sure you have only the external plugged in (no other USB drives) and enable the BD-Mirror and External options in MultiMAN. Even games that didn't need this enabled in 3.55 Kmeaw seem to need it on in RogerO 4.21.
I thought something had gone wrong after my update since every external game would black screen but removing my USB thumbdrive fixed it.
 
To save people a few headaches once you've updated to RogerO 4.21CFW:
Internal games will run fine from my experience. If you're using an external drive, make sure you have only the external plugged in (no other USB drives) and enable the BD-Mirror and External options in MultiMAN. Even games that didn't need this enabled in 3.55 Kmeaw seem to need it on in RogerO 4.21.
I thought something had gone wrong after my update since every external game would black screen but removing my USB thumbdrive fixed it.
So all games that worked on external before still work? That's really important to me. All my games are on external.
 

Aklamarth

Member
Just updated from 4.21 1.0 to 4.21 1.9 using that convoluted 3.55 downgrade method. Trying to update directly using recovery method didn't worked (got corrupted data).

I have updated to 1.9 just for "XMB Icons problem from in-game PS button is now fixed" . That thing not working drove me nuts on 4.21 1.0

Btw....to anyone who wants to upgrade. Before upgrading make sure you do a NAND backup from Multiman. Open multiman, browse to any file, open in hex viewer and press SELECT + START. This will dump the NAND. You will NEED those file in case the upgrade fails.
 

Bloodsent

Member
Official thread on Tortuga Cove has mixed results on older Phat consoles (can't tell if people are not following the convoluted directions, or something buggy is actually bricking people.) Think I may hold off for a bit longer as I don't want to destroy my 60GB running 3.55 KMEAW right now.
 
If I have never downgraded before do I just put the PS3UPDAT.PUP on my usb stick, boot into recovery menu, and install? Going from kmeaw 3.55. Don't wanna wait for N.A. to put up the tutorial. :p

edit: nvm done. easy. success.
 

Surreality

Neo Member
So all games that worked on external before still work? That's really important to me. All my games are on external.

I was worried at first about it too, everything I ran from external would black screen. Once I plugged in only my external HDD and removed the thumb drive, everything started working like it did on 3.55 kmeaw.
You'll still need to resign eboots for anything that was signed for 3.55+ but all in all it seems to work well if you manage not to brick.

Bloodsent said:
Official thread on Tortuga Cove has mixed results on older Phat consoles (can't tell if people are not following the convoluted directions, or something buggy is actually bricking people.) Think I may hold off for a bit longer as I don't want to destroy my 60GB running 3.55 KMEAW right now.

I thought all phat consoles were safe even on the original release; RogerO didn't receive any reports for any bricking. I still run an old CECHL02 so I upgraded without too much worry. Went from 3.55.2 Rebug -> 3.55OFW -> 4.21 RogerO 1.09b.
 

Bloodsent

Member
If I have never downgraded before do I just put the PS3UPDAT.PUP on my usb stick, boot into recovery menu, and install? Going from kmeaw 3.55. Don't wanna wait for N.A. to put up the tutorial. :p

edit: nvm done. easy. success.

So you updated directly from 3.55 kmeaw in recovery? I am kind of in the same boat. My PS3 essentially went from 3.55 OFW to keamw and has been on that since. You didn't do any of the QA enabling instructions or anything?
 

Surreality

Neo Member
So you updated directly from 3.55 kmeaw in recovery? I am kind of in the same boat. My PS3 essentially went from 3.55 OFW to keamw and has been on that since. You didn't do any of the QA enabling instructions or anything?

QA Flagging can help but you don't need to dehash unless you've downgraded at some point.
 
So you updated directly from 3.55 kmeaw in recovery? I am kind of in the same boat. My PS3 essentially went from 3.55 OFW to keamw and has been on that since. You didn't do any of the QA enabling instructions or anything?
Nope no QA needed. Just rename the rogero pup to UPDAT.PUP put in PS3/UPDATE folder on USB and boot into recovery (hold down power until turns on then off, then hold down again until two consecutive beeps) and then do system update from usb. Done. Took 3 minutes.

Only weird bug I see is the photo xmb icon is now named homebrew. Doesn't make any sense. It is clearly still the photo section of the xmb.

I was worried at first about it too, everything I ran from external would black screen. Once I plugged in only my external HDD and removed the thumb drive, everything started working like it did on 3.55 kmeaw.
You'll still need to resign eboots for anything that was signed for 3.55+ but all in all it seems to work well if you manage not to brick.
thanks. I need some sleep so I'll test my games in a few hours. :

Glad to have netflix working again! That was worth it alone.

Edit: nvm netflix doesn't work unless your logged into PSN.
 

MMaRsu

Banned
OMG MMaRsu that fucking sucks. My heart sank when I read that happened to you. Gonna set you back a few bones and cause a big headache but you can thankfully flash it back at least. Tough break.

Yeah it really sucks man, it's going to cost me a bit of money but I just wish I had taken that damn disc out. Either way I want to downgrade back fast.
 
3.55 to Rogero's 4.21 CFW Guide: http://www.pshomebrew.net/wiki/3.55_to_Rogero_4.21_Guide

I have no issues playing games from external on 4.21 btw, I have tested a few games and none needed BD-Mirror.
What (if any) region free settings are available for DVDs and Blu-Ray movies in Rogero's?

I wonder if it might not be better to wait for the Rebug firmware, since their 3.55 CFW had some very useful features that none of the other CFWs did.
 
Is there any downside to using BD Mirror even if the games don't need it? I always use it just because I never remember what games need it or don't. And I always have a disc in my system. It just avoids any compatibility issues you may run into.

Noticing a few games that were patched to work on 3.55 still work on 4.21. AC Revelations and Arkham City are two that still work. I don't get it. Just patched eboots. No updates installed.
 

N.A

Banned
Is there any downside to using BD Mirror even if the games don't need it? I always use it just because I never remember what games need it or don't. And I always have a disc in my system. It just avoids any compatibility issues you may run into.

Noticing a few games that were patched to work on 3.55 still work on 4.21. AC Revelations and Arkham City are two that still work. I don't get it. Just patched eboots. No updates installed.

Multiman can remember what what settings to use, just press triangle on the game and select the BD-Mirror checkbox.

What (if any) region free settings are available for DVDs and Blu-Ray movies in Rogero's?

I wonder if it might not be better to wait for the Rebug firmware, since their 3.55 CFW had some very useful features that none of the other CFWs did.

None atm. It should just be a case of finding the new memory addresses though so I doubt it will take long.
 
Multiman can remember what what settings to use, just press triangle on the game and select the BD-Mirror checkbox.
Always forget to do that. No big deal really to press select+X when starting a game.

I'm finding every single game that was fixed for 3.55 is still working on 4.21. So I don't know what some are talking about saying those eboots would have to be reverted to the original or re-signed or something. I've now tried 4 games and they all work. Don't own anymore games that were fixed but I'm sure most games y'all have that were fixed for 3.55 WILL WORK on 4.21. No need to re-rip or revert back to original eboot or whatever. I may have been mis-understanding the whole thing but there you go.

Deux Ex, Max Payne, AC Revelations, and Arkham City are the 4 games. I'm fairly sure these all had eboot patches.

Okay I'm done. Goodluck MMaRsu!
 

mhi

Member
So I have pretty much stayed on DEX the whole time cuz am not big into movies. 3.55 DEX specifically. I never update to the newer (4.21DEX) ones because I don't like using the bdemu, rather play off internal.

Now my question is with the new lv0 leak, is anyone in the scene interested in making a 4.21 DEX CFW that let's me backup the newer game on the internal ?

I'm finding every single game that was fixed for 3.55 is still working on 4.21. So I don't know what some are talking about saying those eboots would have to be reverted to the original or re-signed or something. !

I think some games are patched internally (via a .pkg) and others are just "replace EBOOT". If am not mistaken there is a difference and for the latter portion you might need to go back to the original EBOOTs.
 
Who is the better device team, Rebug or Rogero?

Trying to figure out if its worth it to go to Rogero 4.21 or to wait for Rebug 4.3.

Thanks in advance for any advice/suggestions.
 

N.A

Banned
Does that mean any region check the PS3 does at this point?

It will almost certainly be possible to either patch the region check or spoof your console to the right region. I'm sure you'll see something soon.

Who is the better device team, Rebug or Rogero?

Trying to figure out if its worth it to go to Rogero 4.21 or to wait for Rebug 4.3.

Thanks in advance for any advice/suggestions.

The new Rogero is perfectly stable and safe. I didn't like Rebug's 3.55 CFW as it seemed unnecessarily bloated and lots of the options were useless (I prefer the minimum amount changed from OFW as possible). Ther enew CFW may be based on 4.30 though so maybe it's worth waiting.

:(

Maybe they didn't sign the first release of usercheat? That was the only one that enabled the XMB screenshot function for me on Kmeaw 3.55

It's likely it will need updating to change the memory addresses it uses to enable screenshots/cheats for 4.21 (I'm assuming this is how it works)
 

Ragus

Banned
I'm trying to downgrade to 3.55, but I have a problem. When I go into recovery mode and try to do system update from my external device, I get a prompt:

Data is corrupted.
(8002F2C5).

I tried it with my external HDD and USB flash - on both it says that data is corrupted. Did anyone have this problem?
 

cacildo

Member
Rogero 4.21 questions

- Will Netflix work on it?

- Im on 3.55 kmeaw, and got a spoofer installed. I asked here and people told me to uninstall it before trying Rogero 4.21. Ok, ill do it. But has anyone tested 4.21 with a ps3 that has been "spoofed"?

- Any news on N64 and Ps1/2 emulators? because to be fair, that´s what i really want from homebrew right now.
 
I'm trying to downgrade to 3.55, but I have a problem. When I go into recovery mode and try to do system update from my external device, I get a prompt:

Data is corrupted.
(8002F2C5).

I tried it with my external HDD and USB flash - on both it says that data is corrupted. Did anyone have this problem?

If someone were to post the proper MD5 you could hash check it just to be sure.

Not sure why it wasn't provided in the first place...it's a common practice.

EDIT:

OFW 3.55 Sony md5: ca595ad9f3af8f1491d9c9b6921a8c61
The download above reads: CA595AD9F3AF8F1491D9C9B6921A8C61
so try that if your source was different.
 
Top Bottom