hitsugi
Member
SCR it is then. I'll hold one for you, just remind me prior to the event.
No problem, and thank you!
SCR it is then. I'll hold one for you, just remind me prior to the event.
Wow MKX just announced to have compatibility with ps3 sticks! No word on 360 yet cuz it's on stream and they are playing ps4.
Other competitors are gonna look shady for not adding compatibility as well.
Ball's in your court, CapcomWow MKX just announced to have compatibility with ps3 sticks! No word on 360 yet cuz it's on stream and they are playing ps4.
Other competitors are gonna look shady for not adding compatibility as well.
Very excited that NetherRealms is using our PS3 stick driver.
https://twitter.com/LabZeroGames/status/578663864805539840
Hopefully this won't be the last dev to do so!
That's such an awesome thing you did for the community! So I guess that means stick backwards compatibility will most likely only be on Sony platforms because you don't have a xbox driver, right?
Very excited that NetherRealms is using our PS3 stick driver.
https://twitter.com/LabZeroGames/status/578663864805539840
Hopefully this won't be the last dev to do so!
We don't have a date yet, they're still en route. Once I know, I will let everyone know
Very excited that NetherRealms is using our PS3 stick driver.
https://twitter.com/LabZeroGames/status/578663864805539840
Hopefully this won't be the last dev to do so!
Where are you ordering from? FocusAttack? I just ordered yet another LS-32 from ArcadeShock last night...
The LS-56 has a shorter throw, stiffer spring, and taller shaft. They're both good, and the 56 is particularly good for shmups, but I settled on the LS-32 after several hours comparing it with an LS-56 and a Hayabusa in training mode. I found I was more precise with the LS-32, especially with the diagonals.
If you do go with the LS-32, make sure to get the LS-32-01-SC, since that's the new one which includes a shaft cover.
On my questions from the last page (in terms of the HRAPv4 vs the Kai), anyone know how suitable they'd be for mounting buttons on the side and potentially front? I want something that can double as a pinball controller, but if mounting buttons on the side and front is impossible, then obviously I'd look elsewhere.
Are there other sticks I should consider? Even the Brawlstick?
I was looking at Focus Attack, I'll jump over to Arcade Shock and take a peek. What ever happened to Lizard Lick? I purchased parts from them, but I remember it being more expensive.
LL skipped town with unshipped / pending orders too. Shady af.I was looking at Focus Attack, I'll jump over to Arcade Shock and take a peek. What ever happened to Lizard Lick? I purchased parts from them, but I remember it being more expensive.
LL skipped town wish unshipped / pending orders too. Shady af.
Yeah, I figured as much. Obviously don't want to hack away at something too much that costs ~$200, which is why I'm leaning more towards the Brawlstick. Will keep in mind the 24mm button thing though, that'll definitely need to be taken into consideration.You might be able to do that with some 24mm buttons. Keep in mind that there are handles/wings on the side of the stick for lifting.
LL skipped town wish unshipped / pending orders too. Shady af.
As much as it really sucked that that happened, at the same time Chad was a super cool guy who ran LL incredibly well beforehand. I've always been concerned that maybe something happened since there were some nasty storms in his area at the time.
Sure you can. but why would you want a JLF spring in a hayabusa?For JLF-ready parts like springs, shafts, washers, etc, can I put those on a Hayabusa?
Sure you can. but why would you want a JLF spring in a hayabusa?
I am under the impression that the stock Hayabusa spring is nearly identical to the JLF'sI was gonna try the 2lb spring.
I was gonna try the 2lb spring.
I am under the impression that the stock Hayabusa spring is nearly identical to the JLF's
For JLF-ready parts like springs, shafts, washers, etc, can I put those on a Hayabusa?
Is it May yet?
It's here! There are literally no photos of the Hori RAP V anywhere online at all ever, so here we go.
BOTEC posted theirs in this thread last monthThere are literally no photos of the Hori RAP V anywhere online at all ever]
Interesting that the foam pad is not included as I was hoping that would be a new hori standard going forward.
That sucks to hear about the squeaks in a couple of your joystick switches as I had no issues or squeaking with mine.
Be aware that in order to change out any switches you will have to desolder them, then solder the new ones in. Unfortunately I don't think hori sells replacements either. I replaced mine with the omron d2rvg switches. These might not be what you are looking for as they are the switches used in the sanwa silent stick so there is no clicking. Also in order to use these, a 1mm oversize actuator needs to be used as well. The irony is that one of the switches I received has a squeaking problem. What's weird is that I only hear it if I move the lever in that direction slowly. I don't notice it all while I'm playing so it's not a big deal.
Im not sure if you imported or not but maybe you can try just replacing your stick under warranty. Good luck.
BOTEC posted theirs in this thread last month
bannedMy bad, I only started reading this thread a couple weeks ago. I couldn't find any photos on youtube or google.
Just a heads up, the kowal actuator doesn't fit without shaving it down if you are interested in that.
Wait, what? We put two of the oversized actuators into the Hayabusas here at work without any issues. Was there anything weird about your Hayabusa that caused it to need the shaving?
Is it May yet?
Paint finna rub off by June tho
Are yours the kowals or the ones from Paradise Arcade? I know the ones from Paradise Arcade work fine because of their shape which is more gradual than the kowal. Mine is the kowal and it kept getting caught on the edge of the gate.
The issue was the kowal sitting too low. I remedied that by putting a second e-clip but it wasn't a 100% fix, so I just shaved into it and now I only need one e-clip and there are no issues.
what size screw fastens the control panel to its frame?Just put the finishing touches on this
what size screw fastens the control panel to its frame?